Retrofits onto your existing AAC line and re-stacks the finished product with forklift holes, no pallets, fully automatic.
A next-generation patented line developed specifically for the AAC industry: it re-cubes the cured aerated blocks with reserved forklift holes and packs them, without changing your existing equipment or workflow.
The QS AAC line was developed after years of market research into the specific characteristics of the aerated block industry. It combines an advanced process route, precision machining and high-end electrical configuration, taking the product through de-cubing, brick dividing, hole leaving, re-cubing and finally conveying and packing, achieving fully automatic pallet-free cubing and packing with reserved forklift holes.
Crucially, it does not change your existing equipment configuration or workflow. It connects at the finished-product stacker position of your current line: the bricks arriving on pallets are clamped in layers and intelligently divided and hole-leaved according to the set programme, then re-stacked. Your original finished-product stacker can still be used in the normal way, and the two do not interfere with each other.
According to the cutting method the line is offered as a composite type (several brick types mixed in each mould) or a single type (one brick type per mould). A combined de-cubing and re-cubing robot works together with several brick-dividing / hole-leaving platforms and cuber positions, so different brick types can be separated and stacked with holes at different stations according to the set programme. You choose the configuration according to your actual production needs.
The benefits are straightforward: a high degree of automation, a large quantity of bricks handled, high sorting efficiency, fast running speed, tight coordination between stations, and easy adjustment when switching brick types or changing speed.
Tell us your target output and the raw materials you have, and we will send a detailed quotation.
| Parameter | QS AAC Line |
|---|---|
| Application | Finished-product re-cubing for aerated (AAC) block plants |
| Installation | Connects at the finished-product stacker position of the existing line |
| Impact on existing line | None, original equipment and workflow unchanged; original stacker still usable |
| Cuber type | Pallet-free, with reserved forklift holes |
| Line variants | Composite type (several brick types mixed per mould) / single type (one brick type per mould) |
| Core equipment | Combined de-cubing and re-cubing robot + multiple brick-dividing and hole-leaving platforms + cuber positions |
| Process steps | De-cubing → brick dividing → hole leaving → re-cubing → conveying and packing |
| Brick type changeover | Programme-based; speed adjustable at any time |
The pictures and parameters above are for reference only, and the final interpretation right belongs to our company. Final specifications are confirmed in the contract.
Send us your requirements for the QS AAC Line and we will come back with the machine list, a layout drawing and a price.
Enquiry about: QS AAC Line, QS Series AAC Block Intelligent Hole-Leaving Cuber Production Line
Water-to-gypsum ratio cut to about 30%, blocks go to the warehouse without drying or airing, and comfortably exceed JC/T 698-2010.
Mould-line production of cement composite sandwich partition panels, in 60 / 75 / 90 / 120 mould configurations.
The flagship line for surface-critical products: permeable pavers, imitation-stone PC bricks and thin-wall insulation blocks.