We manufacture concrete block and cement brick making machines, fully automatic production lines, cuber systems and hydraulic brick presses in our own factory in Quanzhou, China. We design the plant around your raw material, your site and the products you need to sell, then install it and train your team.
From a single machine to a complete turn-key plant, every part of the line from one supplier.
Turn-key concrete block and brick plants, from batching and mixing to curing, cubing and automatic packaging. Suitable for pavers, hollow blocks, imitation stone (PC) bricks, kerb stones and thin-wall insulation blocks.
Brick/pallet separation, brick arranging and palletizing for cured blocks. Low-position, high-level, fixed, simple, double-station and mobile (crawler) types, match with any brand of block machine.
Vibration-press block machines from QST6-15 up to QST1800, including servo-driven and pallet-free wet-block types. One machine, many products, change the mould, change the product.
Static (hydraulic) pressing machines for high-strength solid bricks, pavers and shaped products. Single-direction and double-direction pressing, pallet-free options available.
Semi-dry gypsum block lines, AAC block intelligent hole-leaving cuber lines and lightweight composite wall panel equipment, for factories diversifying into higher-value building materials.
Automatic balers, wrapping machines, forklift clamps, pallet feeders, planetary mixers and batching machines, everything around the block machine.
The flagship line for surface-critical products: permeable pavers, imitation-stone PC bricks and thin-wall insulation blocks.
One operator, about 3,800 pallets per shift. Separates, arranges and stacks cured blocks into 1,000–1,200 mm square stacks.
Servo-driven, high-output flagship. Up to 220,000 standard bricks per 8-hour shift on the QST1800.
Electro-hydraulic integration, 20% higher output and 30% faster fault-finding than ordinary block machines.
The entry-level workhorse, the lowest investment way into automatic block production, with genuine imported hydraulic and electrical components.
We do not sell isolated machines. We design a plant that fits your material, your site and your market, and we stay with you after installation.
We quote the whole plant: batching, moulding, curing, cubing, packing, pallets, moulds and foundations. You get one supplier and one point of responsibility.
Fly ash, slag, coal gangue, construction waste and local sands change everything. We adjust the mix design and machine settings for the material you actually have.
Our lines network every component and report to the cloud, so our engineers can see a fault before you have to send anyone anywhere. Most faults are cleared the same day.
Commissioning includes hands-on operator training until your team runs a full shift unaided. Written manuals and spare-part lists are supplied in your language.
The hole-leaving cuber, the pallet-free wet-block system and the semi-dry gypsum process are our own patented developments. They are not copies of imported machines.
380 V or tailored voltages, dust and heat tolerant electrics, container-friendly packing, and full export documentation. We ship to ports worldwide.
The lowest operating-cost configuration for standard solid bricks, concrete blocks and Holland bricks. The wet block is cubed straight off the machine with the QSMT series, so pallets never enter the process. Best when your product is a small, uniform block and your priority is cost per thousand pieces.
For permeable pavers, imitation-stone PC bricks, kerb stones and thin-wall insulation blocks, the visible face is the product. The QSGW line keeps every layer of brick on its own pallet through three-dimensional curing, so nothing is crushed and nothing is marked. Higher investment, higher product value.
If you already have a block machine and the bottleneck is manual stacking, you do not need a new plant. You need a cuber. The QS-1200A, QS-1200B and QS-1000G series bolt onto your existing line, and the QSRGY finger-car line replaces manual or chain transfer with an automated curing system.
Colour-faced pavers demand a proper batching and mixing section, a press with enough force for sharp edges, and a curing system that does not mark the face. Pair the QST1200 or a QS hydraulic press with the CMP planetary mixer and a QSGW or QSDJ curing line.
If your market is saturated with ordinary blocks, these are the higher-value products to move into: AAC blocks (with our intelligent hole-leaving cuber retrofit), semi-dry gypsum blocks, and lightweight composite partition panels.
The last fifty metres decide whether the customer accepts the delivery. Strap and wrap the pack so it survives a sea container: PET strapping balers, cantilever winding with top-film, and forklift clamps so the pack can be lifted and loaded without pallets.
Tell us the products and the output you need. We will come back with a machine list, a layout drawing and a price, usually within one working day.
