Block Making Machine Price in Baghdad: Output Tier and Freight

A block making machine price in Baghdad is eight lines on a quotation, not one figure, and the lines a supplier leaves out come back later as invoices. The host machine is only the first line. Moulds, pallets, batching and mixing, palletising, packing, freight and duty, foundations and the power connection, then installation and training all sit behind it.

Two quotations for the same yard usually differ in scope, not in price. Below are the line items, the specification numbers that prove each one, and the adders that freight, duty and site conditions bring.

1. The eight lines a complete quotation should carry

Every line needs a specification, not a name. A quotation that lists only the machine model leaves the buyer to guess the scope. Put the eight lines side by side and ask the supplier to mark each one as included, optional or excluded before you compare totals.

• Host machine: rated pressure, installed power, pallet size, cycle time and vibration force.
• Moulds: one set per product shape, priced per shape and per cavity count.
• Pallets: the largest consumable line on a pallet-based plant.
• Batching and mixing: the twin-shaft mixer, its power and its maximum aggregate size.
• Palletising: the stacker or palletiser, its power and its cycle per layer.
• Packing: strapping or wrapping, its power and the plant voltage.
• Landed cost: sea freight, duty and inland transport to the site gate.
• Site work: foundation, curing yard, power connection, installation, training and the first trial mix.

2. The host machine line: read the specification, not the tier name

The machine line is where a quotation earns trust. Three numbers have to agree with each other: installed power, machine weight and pallet size. A QST8-15 states 44.9 kW and 14 t on a 980 x 860 x 22 mm pallet. QST1200 states 57.6 kW and 17 t on a 1,350 x 880 x 25 mm pallet. QST1800 states 104 kW and 34 t on a 1,400 x 1,400 x 30 mm pallet.

When those three numbers disagree, the line is describing a light frame with a heavy name. Weight is the most expensive of the three, so it is the first number a weak quotation drops. Ask for the pallet drawing and the machine footprint as attachments, not as a verbal promise.

Pressure and force belong on the same line as the three numbers above. Our hydraulic units hold 31.5 MPa, and vibration force runs from 95 kN on a QST8-15 to 280 kN on a QST1800, over a 15 to 25 second cycle. Those two figures say what the frame can compact, and they are checkable against the mould you order.

3. Moulds: one set per shape, and the cavity count sets the output

A mould set forms one product shape. Change the shape and you change the set, so a plant selling two block sizes buys two moulds for one machine. The cavity count is what turns cycle time into output per shift, and it follows the press, not the mix.

On a 390 x 190 x 190 mm hollow block, a QS800 forms 5 pieces per mould, a QS1000 forms 10 and a QS1500 forms 12. On a 200 x 100 x 60 mm paver, the count runs 16 on a QS600, 24 on a QS800, 32 on a QS1000 and 40 on a QS1500. A quotation that lists the machine and one mould has not priced your product range yet.

4. Pallets: the consumable line that fixes how many you order

Pallets go back to the machine hundreds of times, and they are the largest consumable item on a pallet-based line. Pallet size follows the machine: 980 x 860 x 22 mm on a QST8-15, 1,100 x 880 x 25 mm on a QST1000, 1,350 x 880 x 25 mm on a QST1200 and 1,400 x 1,400 x 30 mm on a QST1800.

Order too few and output is capped, because a loaded pallet sits in the curing yard for days before it can be reused. Order too many and cash is tied up in a consumable. The workable number comes from your curing days and your shift output, so write both down before anyone sizes the pallet round.

5. Mixer, palletiser and packing: the lines that go missing

Batching and mixing is a full station, not a paragraph. A twin-shaft mixer in our range draws 25.5 kW up to 75 kW, handles aggregate up to 80 mm (rounded stone) or 60 mm (crushed), and its size follows the cycle time of the press, not the other way round.

Handling and packing carry their own figures. The QS-1200A low-level palletiser draws 34.15 kW on a 15 to 18 second cycle per layer, occupies 12,000 x 3,000 mm and stacks to 1,400 mm. The QSSX-16A strapping machine draws 3.1 kW at 380 V / 50 Hz on a 15 to 18 second cycle. Leave these out and the plant still cannot ship a pallet of blocks.

6. Landed cost and site conditions: the adders nobody prices by default

Freight, duty and inland transport commonly add +15% to +40% to the equipment figure, and the width of that band is set by the destination, the number of containers and the distance from the discharge point to your gate. Machinery is roughly 40% to 55% of the total build, so the equipment line stops being the budget as soon as the foundation and the power connection start.

None of that can be priced from our desk. Give us the discharge port, the site voltage and frequency, the lifting equipment available for unloading, and the block shapes and raw materials you will run. Those four answers replace a guess with a list.

Machine weight lands in the civil works budget as well. A 34 t frame on a 1,400 x 1,400 x 30 mm pallet needs a deeper foundation, a wider access route and a larger crane than a 6,200 kg machine, so the site line should state who supplies the anchor bolts, the grouting and the lifting plan.

7. Installation, training and the first trial mix

The last lines are labour, not steel: installation, operator training and the material for the first trial mix. Ask what the supplier covers at the site, for how many days, and whether the commissioning run uses your own aggregate and cement. A machine that starts on local material in the first week saves more than a discount off the invoice.

Send us the destination port, your site power in volts and hertz, your lifting and offloading conditions, and the block shapes and raw materials. We reply with a line-by-line quotation built on those four answers, and every item on it is marked as included, optional or excluded.