QS Series Forklift Clamp for Brick Handling

Product Description

<h2>Pallet-Free Brick Handling</h2><p>The QS series forklift clamp grips finished bricks directly, so plants move, stack and load product without wooden pallets. It fits aerated concrete, autoclaved bricks, sintered bricks, non-fired bricks and precast concrete components, which means one attachment covers most of the block types a plant produces instead of several dedicated devices.</p><p>Working without pallets removes a material loop from the yard. No pallets means no purchasing, no repair shop, no return trip and no ground space held by empty pallet stacks, which is often the hidden cost in a brick handling operation.</p><h2>Frame, Arms and Grip Quality</h2><p>The clamp is built on an all-steel integral frame, giving high strength and smooth operation under repeated heavy lifts. The clamping arms are optimized for force distribution, so pressure spreads across the stack rather than concentrating at a few contact points. The result is a strong, stable grip that holds bricks firmly without chipping edges or cracking faces, which keeps more of the finished product sellable.</p><p>Structural optimization also keeps the operator's field of view open. Hydraulic drive runs the clamp, and the left-right lateral movement function covers 100 mm of travel, letting the operator line up one stack against the next with fine control instead of repositioning the whole forklift.</p><h2>Coverage, Stroke and Capacity</h2><p>A long stroke design lets the arms reach stacks of varying widths. The arm opening range runs from 680 to 1150 mm, with a gripping width of 1000 mm and a working stack size of 1000 by 1000 by 1000 mm. That spread means the attachment handles standard bricks, hollow bricks, paving bricks, eight-brick units and aerated blocks on the same machine.</p><p>Load capacity is 2000 kg, enough to lift around 500 to 800 standard bricks or 40 hollow bricks at a time, with the load stacked as high as 10 layers of standard bricks or 5 layers of hollow bricks. Handling at that scale moves large volumes per trip, so loading and yard work finish faster and need fewer operators compared with manual or pallet-based methods.</p><h2>Where the Clamp Fits in a Line</h2><p>The clamp is used to transfer and stack finished brick piles on production lines, to load and transport concrete bricks and aerated blocks without pallets, to organize and reposition finished stacks in factory storage areas, and to work alongside automated stacking and packaging lines. Because it is a forklift attachment, it plugs into equipment plants already run and does not require a new machine base.</p>